[j-nsp] EX-SFP-10GE-USR : Tranceiver can be used with OM4 Cabling ?

[Matheus - Infinite IT Consulting]

Dear, maybe your Juniper equipment and SFP need to support framing 
wan-phy mode

Best Regards,

Matheus R A Plastino


Em 8/31/2014 3:43 PM, Josh Hoppes escreveu:
> I don't think you should have any problems using it with OM4 since the
> optic supports OM3, and those two standards share the same
> core/cladding size (50/125).
>
> On Sun, Aug 31, 2014 at 7:08 AM, Nc Aji <aji14730 at gmail.com> wrote:
>> Hi Team,
>>
>> Can we use the EX-SFP-10GE-USR tranceivers with OM4 cabling. it works out
>> quite cheap as compared to EX-SFP-10GE-SR and in my case the distance below
>> 100 meters.
>>
>> I am trying to propose this with EX4450 switches.
>>
>> Thanks in Advance
>>
>> ANC
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>