[j-nsp] Transfer some task from MX to VRR

[coy.hile]

Quoting Eric Van Tol <eric at atlantech.net>

>> -----Original Message-----
>> From: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] On  
>> Behalf Of Robert Hass
>> Sent: Monday, December 01, 2014 7:30 AM
>> To: juniper-nsp at puck.nether.net
>> Subject: [j-nsp] Transfer some task from MX to VRR
>>
>> Hi
>> Just readed release notes for 14.2 and I found that starting this release I
>> can transfer some task to external VRR.
>>
>> So my idea is to move all BGP from MX80 to VRR. But how it can be performed
>> for external BGP sessions where I have just /30 or /31 subnets to customers
>> ? (of course without ebgp multihop).
>
> I'm pretty sure the VRR is mostly for solving the problem of iBGP  
> session scaling.  If that's not the case, I'm sure someone will  
> correct me.
>
> You don't have much choice with eBGP if you don't want to use  
> multihop, unless you want to backhaul every customer circuit via L2  
> to your VRR, in which case the VRR is basically the gateway for the  
> customer's circuit.
>
> -evt
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



Sent via the Samsung GALAXY S® 5, an AT&T 4G LTE smartphone


-------- Original message --------
From: Eric Van Tol <eric at atlantech.net>
Date:12/01/2014  8:09 AM  (GMT-05:00)
To: juniper-nsp at puck.nether.net
Cc:
Subject: Re: [j-nsp] Transfer some task from MX to VRR