[j-nsp] MX80 Sampling - High CPU

[Scott Granados]

Mikrotek, ouch, the only thing I found they were good for is target practice.:)


On Dec 11, 2014, at 12:19 AM, Eduardo Schoedler <listas at esds.com.br> wrote:

> Em quarta-feira, 10 de dezembro de 2014, Jordan Whited <jwhited0917 at gmail.com> escreveu:
> I found the issue still present in 12.3R8.7 running on an MX80. In 11.4R7.5
> with sampling enabled it was taking upwards of 12 minutes for routes to
> propagate to the FIB when taking in a full ipv4 with ~250k active-paths, in
> 12.3R8.7 I measured it closer to 3 minutes. Seems to be improved, but still
> unacceptable.
> 
> What do you expect from a PowerPC processor that's used for mikrotik's routerboards?
> 
> Thake a look in dmesg. 
> 
> --
> Eduardo Schoedler
> 
> 
> -- 
> Eduardo Schoedler
>