[j-nsp] Export Inactive BGP routes with the best route is a BGP Route.

[Gustavo Santos]

The advertise inactive feature only works if you only BGP route for the
destination but the active one is from another routing protocol.
When you have two BGP routes for the same destination. This feature doesn´t
work.

2014-12-16 5:02 GMT-03:00 Alexander Arseniev <arseniev at btinternet.com>:
>
>  Have You tried "from route-state inactive" in Your policy?
>
> http://www.juniper.net/documentation/en_US/junos13.2/topics/example/bgp-advertise-inactive.html
> HTH
> Thanks
> Alex
>
>  On 15/12/2014 22:22, Gustavo Santos wrote:
>
> Hi,
>
> I have a customer that needs to receive all routes from one of our transit
> suppliers. The problem is after some research the Junos don´t allow this.
> If I understood correctly, the advertise-inactive command, just works if
> the active route is OSPF, Static or from any other but BGP.
>
>
> Any of you know any work around for this situation? It´s pretty common on
> IOS.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.nethttps://puck.nether.net/mailman/listinfo/juniper-nsp
>
>
>