[j-nsp] MX80-1 JFlow

[Scott Granados]

You do not want to run version 9 in this case.

set forwarding-options sampling instance blah family output flow-server 199.b.c.d port 9999 version-ipfix template ipv4

set forwarding-options sampling instance blah family inet output inline-jflow source-address 199.loopback.0.address 
(or similar)
note that you can not originate flow data for capture from with in a routing instance, source must be in the global router.

Thanks
Scott

On Dec 23, 2014, at 1:14 PM, Levi Pederson <levipederson at mankatonetworks.net> wrote:

> All,
> 
> Sorry for the inconvenience.  There is a request to move to version9 under
> Forwarding options and Services but as I implement I'm getting tons of
> requests for config changes that do not make much sense.
> 
> Sending Errors Now
> 
> -mx80-1# commit check
> [edit forwarding-options sampling instance calix family inet output]
>  'flow-server'
>    Output 'interface' or 'inline Jflow' should be configured with
> flow-server
> [edit forwarding-options sampling instance calix family inet output
> flow-server 199.71.143.217]
>  'version9'
>    Service PIC or inline-jflow (j-series and SRX only) must be specified
> for version9
> error: configuration check-out failed: (statements constraint check failed)
> 
> Any help or direction pointing would be helpful.
> 
> Thank you,
> 
> *Levi Pederson*
> Mankato Networks LLC
> cell | 612.481.0769
> work | 612.787.7392
> levipederson at mankatonetworks.net
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp