[j-nsp] move routes from VRF to inet.0

[Tobias Heister]

Hi,

Am 04.02.2014 04:25, schrieb Bikram Singh:
>> There might be a couple of alternate solutions coming to mind:
>> 1. move all internet Routes to the CE1 table and use static routes to point back at the VRF with next-table from inet.0 which will not really scale beyond a single l3vpn.
>> 2. use a separate VRF for the internet routes and use auto-export, rib-groups, vrf-import/export policy to move routes around. This would need a rework of our network and is not really
> feasible right now.
> 
> If point 2. is not feasible then you can do below
> 
> Since you have already put a static route from VRF pointing to inet.0 for the traffic going to internet now you need to work for reverse traffic from internetto CE1 or CE2 .
> 
> As you have mentioned that they use Public IP in that case you can put all VPN routes (from CE1 and CE2 )  or aggregate routes into inet.0 using rib-goups to attract reverse traffic from
> internet .

That is actually what i am trying right now. But i am not able to put all the VPN Routes into inet.0
I have trouble to move the ones learned from the remote PE, as i have no clue how and where to match them with a rib-groub as they are from protocol BGP and are placed there by the l3vpn
itself. If you happen to have an example how to move the BGP routes received from the remote PE to inet.0 i would be happy if you would share it.

I already have a manual aggregate route covering CE1 and CE2 prefixes in inet.0 which i am exporting into the iBGP to get the internet incoming Traffic to the PE1. What i am missing are
routes for the remote CE/PE on PE1 inet.0 in order to direct the traffic to the remote PE (PE2/CE2).

regards
Tobias