[j-nsp] VLAN's on EX4300 with 13.2X50-D15.3

[Giuliano Cardozo Medalha]

ex4300 uses next generation cli for L2

instead of use interface vlan you need to use interface irb

set vlan TEST vlan-id 20 l3-interface irb.20

set interface irb unit 20 family inet address 192.168.20.100/24

and now for port mode ( access x trunk ) you need to use

interface-mode ...

dhcp-relay and rstp changed too ...

set forwarding-options dhcp-relay ... and not helpers anymore

set protocols rstp interface ge-0/0/0

you need to declare every interface under rstp ...

wildcard range set protocols ... helps

wildcard range set interfaces ... too

to see trunk ports

>  show ethernet-switching interface | except untagged |  match tagged



Sent from my iPhone

> On 19/02/2014, at 00:44, Janusz Wełna <janusz.welna at gmail.com> wrote:
> 
> Hi,
> 
> 
> Why when I have below config:
> 
>  ge-0/0/44 {
>        description test;
>        unit 0 {
>            family ethernet-switching {
>                vlan {
>                    members vlan103;
>                }
>                storm-control default;
> 
>   unit 103 {
>            description test;
>            family inet {
>                address 10.46.163.1/29;
> 
> 
>    vlan103 {
>        description test;
>        vlan-id 103;
>        l3-interface vlan.103;
> 
> 
> 
> 
> I cannot ping from EX4300 10.46.163.1 and I cannot ping 10.46.163.1 from
> server connected to ge-0/0/44
> 
> 
> 
> 
> But when I add below:
> 
> 
> irb {
>        unit 103 {
>            family inet {
>                address 10.46.163.1/29;
> 
> 
> and delete :
> 
> 
> vlan103 {
>        description SGI;
>        vlan-id 103;
>        l3-interface vlan.103
> 
> 
> 
> 
> ping works correctly.
> 
> 
> On EX3300, EX4200 and EX2200 I not need setup irb interface, why I need on
> EX4300 ?
> 
> 
> 
> Br,
> 
> 
> Janusz
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp