[j-nsp] ECMP in Virtual Router and IP-Track

[mahmoud yasin]

But the RPM is not supported in SRX high-end series, so I think the script must has the capability to probe the servers IPs as well.

Any one has a script for the same idea and requirement!

Regards



________________________________
 From: mahmoud yasin <eng_mahmood48 at yahoo.com>
To: "juniper-nsp at puck.nether.net" <juniper-nsp at puck.nether.net> 
Sent: Wednesday, February 19, 2014 4:54 PM
Subject: [j-nsp] ECMP in Virtual Router and IP-Track
 

Hi
 
I have SRX5800 and want to load balance traffic per flow (will use 
12.1) between two proxy servers, the two servers are inside a virtual 
router and they are not directly connected to the firewall.
 
Concerns;
 
1-  Is it supported to apply ECMP in VR; since the forwarding-table 
(in which the loading policy will be applied) is part of inet.0?
 
2- I think IP-Track is not supported yet for high end SRX and even in version 12.1, but its needed in my case since the two servers are not 
directly connected, so the static routes will remain active if the 
servers goes down.
Is there a way to prope the links else than the scripts?
if not, then any comments about scripts?

Mytel
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp