[j-nsp] EX switch corrupt and stuck in u-loader

[Maarten van der Hoek]

Hi Abdullah,

Unfortunaly ... yes.. :(
Had to send it for RMA (EX is lifetime support....with J-Care even fast!)

Brgds,

Maarten

-----Oorspronkelijk bericht-----
Van: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] Namens
Abdullah Baheer
Verzonden: maandag 24 februari 2014 12:29
Aan: juniper-nsp at puck.nether.net
Onderwerp: [j-nsp] EX switch corrupt and stuck in u-loader

Hi
I have an ex switch which got corrupt due to abrupt power off and i tried to
recover it from USB flash drive.
Normally the switch would be showing "junos loader' on the switch when it is
corrupt.
The problem is now the switch is showing "u-loader" and when i reboot it, it
only shows around five messages on the console and gets stuck at "usb:"
This happens weather or not I have a USB flash drive connected.

This output is all i see on my console:

U-Boot
1.1.6 (Feb  6 2008 - 11:27:42)
 
Board:
EX3200-48POE 2.23
EPLD:
 Version 6.0 (0x85)
DRAM:
 Initializing (512 MB)
FLASH:
8 MB
USB:

Has anybody seen this before?

Thanks
Abdullah
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp