[j-nsp] OSPF Confusion

[Per Westerlund]

I think Eduardo forgot to mention that you should also change the metric to be Type 1, then the internal metric will be added and I think you get the behavior you want.

/Per

Sent from my iPad, please ignore stupid spelling corrections!

> 27 feb 2014 kl. 21:23 skrev Eduardo Barrios <Eduardo.Barrios at LCRA.ORG>:
> 
> Hi Christ,
> 
> This from Juniper about exporting into ospf and metrics:
> 
> http://www.juniper.net/techpubs/en_US/junos13.1/topics/concept/ospf-routing-external-metrics-overview.html
> 
> 
> So if you exported your static routes into OSPF they will be a Type 2 external metric (you can check with "show ospf database external detail"), use only external cost and not take into account the link-state metric in your diagram. 
> 
> * You might have to write an export policy: from protocol static + any route-filter that you need, then accept and also add metric xx
> 
> Thanks,
> Eduardo
> 
> Eduardo Barrios, EIT, JNCIP-SP
> Telecommunications Specialist
> Lower Colorado River Authority  | 3505 Montopolis Dr. |  Austin, TX 78744
> 512.730.6332 ph