[j-nsp] Mutli-Chassis LAG is not supported on SRX cluster

[Samol]

Dear list,

i'm trying to configure MC-LAG on clustering SRX and got below
message. it does say we need the member links to be on the same node.
Is there anything that can be used to accomplish this so that
redundancy is in place.


[edit interfaces ge-9/0/5 gigether-options]
  '802.3ad'
     In Clustering mode, child links ge-9/0/5, ge-0/0/5 of bundle ae1
must be from same chassis
error: configuration check-out failed


Below is the configuration:

[edit interfaces ge-0/0/5 gigether-options]
+     802.3ad ae1;
[edit interfaces ge-9/0/5 gigether-options]
+     802.3ad ae1;
[edit interfaces]
+   ae1 {
+       aggregated-ether-options {
+           lacp {
+               passive;
+           }
+       }
+   }


Regards,
-- 
Samol Khoeurn
(855) 077 55 64 02 / (855) 067 41 88 66
Network Engineer
Cisco: CCNA/CCNP SP/CCIP/
Juniper: JNCIA/JNCIS-ENT,SP,SEC/JNCIP-ENT
www.linkedin.com/in/samolkhoeurn