[j-nsp] MX ping - ToS overrided
Serge Vautour
sergevautour at yahoo.ca
Wed Jan 22 11:51:25 EST 2014
If you're capturing your outbound ping packet, why does the capture show "echo reply"? Shouldn't you be capturing the echo request?
Serge
________________________________
From: Arash Alizadeh <arash.a at hotmail.se>
To: "juniper-nsp at puck.nether.net" <juniper-nsp at puck.nether.net>
Sent: Wednesday, January 22, 2014 10:21:44 AM
Subject: [j-nsp] MX ping - ToS overrided
Hi,
I'm experiencing issues when initating ToS ping from MX devices. The specified ToS argument just seems to be overrided to dec 192 when leaving the interface.
I verified this with the traffic monitor on the egress interface:
user at node> ping 8.8.8.8 tos 96
64 bytes from 8.8.8.8: icmp_seq=0 ttl=246 time=15.675 ms
64 bytes from 8.8.8.8: icmp_seq=1 ttl=246 time=15.385 ms
user at node> monitor traffic interface xe-0/0/0.0 extensive matching icmp
PFE proto 2 (ipv4): (tos 0xc0, ttl 255, id 16332, offset 0, flags [none], proto: ICMP (1), length: 84) x.x.x.x > 8.8.8.8: ICMP echo reply, id 47826, seq 0, length 64
14:06:58.721197 Out
I've tried this on 11.4R6.6 and 12.3R4-S2 (ppc and 64-bit) boxes with the same result.
Did anyone else ran into this issue?
Any input is appriciated.
Regards,
Arash
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp
mailing list