[j-nsp] config msti vlan range?

[Peter Tavenier]

Just use the command with 'vlan 1-10' 
http://www.juniper.net/techpubs/en_US/junos14.1/topics/reference/configuration-statement/vlan-edit-protocols-mstp.html

Kind regards, 
Peter

> Op 22 jul. 2014 om 05:22 heeft Victor Sudakov <vas at mpeks.tomsk.su> het volgende geschreven:
> 
> Colleagues,
> 
> I have now the following configuration:
> 
> admin at sw-km270# show protocols mstp msti 2
> vlan [ management ENERGY NATEKS PASOLINK-Management MNCS ITSO ];
> 
> How do I replace the explicit list of vlans with a range like
> 10....500 ?  What's the configuration command syntax?
> 
> I suppose it's a general Junos syntax question (using ranges of
> values) but somehow I cannot find the obvious. Thanks a lot for helping.
> 
> 
> -- 
> Victor Sudakov,  VAS4-RIPE, VAS47-RIPN
> sip:sudakov at sibptus.tomsk.ru
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp