[j-nsp] Juniper T640 DC power cable lugs

[joel jaeggli]

it's .63 center to center...

the only part of the spec you care about is

Cable lug; dual hole, sized to fit 1/4-20 UNC terminal studs at 15.86-mm
(0.625-in.) center line.

https://www.anixter.com/en_au/product-set.Electrical%2BSupplies.Power%2BConnectors%2Band%2BLugs.html

this is probably a walkup item at your local graybar,

On 6/5/14, 5:33 PM, Scott wrote:
> Hi Guys,
> 
> I am hoping somebody here can point me in the right direction.
> 
> I have two T640's sitting around here at the office after it was
> decommissioned which I would like to start using in our lab for JUNOS
> testing purposes. Unfortunately while it was being decommissioned, the DC
> also removed cabling so we lost the original power cable lugs which came in
> the accessory box when it shipped.
> 
> The router is no longer under a support contract so I can't really ask JTAC
> for any guidance and our SE didn't know if they could be purchased
> separately. I have literally googled for hours but can't find anything that
> has the exact same dimensions and specs as listed on
> http://www.juniper.net/techpubs/en_US/release-independent/junos/topics/reference/specifications/dc-power-t640-cable-specifications.html
> .
> 
> Does anyone happen to know where I could purchase these specific cable lugs
> online?
> 
> Thanks!
> 
> Scott
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
> 


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 286 bytes
Desc: OpenPGP digital signature
URL: <https://puck.nether.net/pipermail/juniper-nsp/attachments/20140605/5b3e68b0/attachment.sig>