[j-nsp] SRX FBR and destination nat
Per Westerlund
p1 at westerlund.se
Fri Jun 27 01:02:20 EDT 2014
If you start by setting up traceoptions as in the excellent article
referred to by Ben, you will probably find the problem easily. Then,
making the RI cat a virtual-router instead of a forwarding instance
(with the ISP ifl in it) and setting up proper policy will probably be a
good start to getting everything working.
/Per
On 27 Jun 2014, at 1:59, Ben Dale wrote:
> Hi Yuriy,
>
> This exact configuration is documented quite thoroughly in Recipe 12
> in the Day One: Juniper Ambassadors' Cookbook for Enterprise found
> here:
>
> http://www.juniper.net/us/en/community/junos/training-certification/day-one/networking-technologies-series/cookbook-for-enterprise/
>
> Credit for this particular one (and the 5 different solutions
> provided!) goes to Peter Klimai!
>
> Cheers,
>
> Ben
More information about the juniper-nsp
mailing list