[j-nsp] JFLOW

[Timh Bergström]

We have similar traffic-levels (a bit more actually) and sample 1:100
and handle the analysis on an E3 3.0Ghz/16GB RAM/2x500GB SATA SW-RAID1
with 10G card with no problems and loads of capacity to spare.

//T

On Thu, Mar 27, 2014 at 8:04 PM, Keith <kwoody at citywest.ca> wrote:
> Hi.
>
> We just picked up some JFLOW licenses and are going to be exporting
> flows from two different connections.
>
> Total traffic from both providers combined peaks about 3.5G down and about
> 300 Meg up.
>
> We have an MX480 with a shiny new MPC2 and 4x10G card to install into the MX
> so we will
> probably need to use one of the 10G ports to export the traffic to the
> analyzer box.
>
> What kind of specs should I be looking at for a server to analyze this much
> traffic?
>
> Thanks,
> Keith
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp



-- 
Timh Bergström
Head of System Operations
+46 727 406 845

Videoplaza AB
S:t Eriksgatan 46C
Stockholm
www.videoplaza.com

Think before you print.