[j-nsp] Limitations of MPLS support on EX4200

Gordon Smith gordon at gswsystems.com
Thu May 1 21:34:10 EDT 2014


 Label depth - EX4200 only supports a single MPLS label on a packet.

 See 
 http://www.juniper.net/techpubs/en_US/junos13.3/topics/concept/mpls-label-operations-ex-series.html



 On Thu, 1 May 2014 14:15:36 +0700, Victor Sudakov wrote:
> Colleagues,
>
> Is MPLS support on EX4200 not complete? It is not a router after all,
> it is an L3 switch, so I expect there to be limitations.
> Where can I read more about EX4200 MPLS limitations and supported 
> features?
>
> E.g. I cannot find "ldp" under "edit protocols".
>
> I have an Advanced license installed with says:
>
> admin at sw-us-parabel> show system license
> License usage:
>                                  Licenses     Licenses    Licenses    
> Expiry
>   Feature name                       used    installed      needed
>   bgp                                   0            1           0
> permanent
>   isis                                  0            1           0
> permanent
>   mpls                                  0            1           0
> permanent



More information about the juniper-nsp mailing list