[j-nsp] Site to Site VPN issues with Cluster

[Mattias Gyllenvarg]

Recently had a similar issue, had to use the primary external IP as HUB ip.
Double check the recommended JunOS version on the cluster. I dont think 12
is recommended.

//Mattias


On Thu, May 8, 2014 at 10:04 PM, Levi Pederson <
levipederson at mankatonetworks.net> wrote:

> Greetings,
>
> I've created several VPNs with little or no trouble in the past.  Between
> both Cisco and Juniper devices.  But I am a little stumped by I cannot
> connect a simple (Static IP) IPSec Tunnel between an SRX240 Cluster and a
> single srx210.  I've checked the policies and the proposals and they are
> spot on identical.  I've put the external interface on the cluster (lo0.0)
> on the right external zone.  I'm also running OS 12.1.X44.D30 which
> supports.  I've been reading several diatribes on how to place the loopback
> into the redundancy and I have done that as well.  I'm still gathering the
> configurations for perusal as they need to be secured.  First question
> would be, does anything instantly pop out to anyone?  I'll have the configs
> loaded as soon as I can.
>
> Thank you,
> *Levi Pederson*
> Mankato Networks LLC
> cell | 612.481.0769
> work | 612.787.7392
> levipederson at mankatonetworks.net
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
*Med Vänliga Hälsningar / Best Regards*
*Mattias Gyllenvarg*