[j-nsp] ACX Series Technical Information

[Tim Jackson]

ACX is Broadcom Enduro inside. Basically a Cisco ASR901 (or Ciena 39xx).

Route scaling for all ACX is somewhere around 12k routes (give or take, its
11p on Bourbon Street)..

Licensing is only for ptp as far as I know. I had talks about reducing
price on units and per-port licensing was talked abou.t but no general
licensing is in place.

Runs 12.3X code.. Limited DHCP, most shit works.. I've deployed many 10s of
units so far as edge PEs with good success.
On May 13, 2014 10:02 PM, "Skeeve Stevens" <
skeeve+junipernsp at eintellegonetworks.com> wrote:

> Hi all,
>
> The Juniper website is very light on technical information and capabilities
> of the ACX platform.
>
> Things such as throughput comparisons between models, routing protocols,
> number of routes per routing protocols supported, etc.
>
> There also is no mention of licensing on the base datasheet, so I am
> assuming everything it mentions, it is licensed for.
>
> Does anyone know of more detailed information?
>
> ...Skeeve
>
> *Skeeve Stevens - *eintellego Networks Pty Ltd
> skeeve at eintellegonetworks.com ; www.eintellegonetworks.com
>
> Phone: 1300 239 038; Cell +61 (0)414 753 383 ; skype://skeeve
>
> facebook.com/eintellegonetworks ;  <http://twitter.com/networkceoau>
> linkedin.com/in/skeeve
>
> twitter.com/theispguy ; blog: www.theispguy.com
>
>
> The Experts Who The Experts Call
> Juniper - Cisco - Cloud - Consulting - IPv4 Brokering
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>