[j-nsp] Juniper MVPN and tunnel interfaces.

[Misak Khachatryan]

I had exactly that configuration in mind.

Misak.

Best regards,
Misak Khachatryan,
Network Administration and Monitoring Manager,
GNC-Alfa CJSC.



----- Original Message -----
From: "Mark Tinka" <mark.tinka at seacom.mu>
To: juniper-nsp at puck.nether.net
Cc: "Ivan Ivanov" <ivanov.ivan at gmail.com>, "Misak Khachatryan" <m.khachatryan at gnc.am>
Sent: Saturday, May 17, 2014 4:44:06 PM
Subject: Re: [j-nsp] Juniper MVPN and tunnel interfaces.

On Saturday, May 17, 2014 01:23:29 PM Ivan Ivanov wrote:

> Which means that it should work only with
> 'vrf-table-label'

Yes, but you also don't want to two copies of the same 
Multicast packet coming to the bud node.

Recommended configuration is to keep "vrf-table-label", but 
also have the vt-* interface setup for Multicast only.

This avoids the bud node issue, but also limit impact on the 
data plane.

Mark.