[j-nsp] MACsec on EX switches

[Emil Katzarski]

Looks like this topic is not very popular :(

For EX4200 you need to have MACSec enabled uplink module!

You also need Controlled version of Junos which should be obtained from
your representative in Juniper and is not downloadable from the web. If you
face any bugs it could potentially take longer to get a fixed release.



I would like to ask if anybody has any expierence at all with this feature?
It is available on EX4300 on all ports, by the way.

Any information about MACSec over LAG? Docs don't say anything about it.



On Mon, Nov 11, 2013 at 12:08 PM, Sebastian Wiesinger <
juniper-nsp at ml.karotte.org> wrote:

> Hello,
>
> has anyone here experience with MACsec on EX switches (4550/4200)?
> Especially performance, caveats, problems with the required JunOS
> software (JunOS Controlled)?
>
> Regards
>
> Sebastian
>
> --
> GPG Key: 0x93A0B9CE (F4F6 B1A3 866B 26E9 450A  9D82 58A2 D94A 93A0 B9CE)
> 'Are you Death?' ... IT'S THE SCYTHE, ISN'T IT? PEOPLE ALWAYS NOTICE THE
> SCYTHE.
>             -- Terry Pratchett, The Fifth Elephant
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>