[j-nsp] Firewall Policy Description !!

[Damien Luke]

Hi

SRX running at least 12.1R1.9 will also have description available in the policy and address-book stanzas.

http://kb.juniper.net/InfoCenter/index?page=content&id=KB28624

Damien

> -----Original Message-----
> From: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf
> Of Asad Raza
> Sent: Thursday, 6 November 2014 2:50 AM
> To: Harri Makela
> Cc: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] Firewall Policy Description !!
> 
> Hi
> 
> You can annotate match statement on each policy to add comments. Those
> comments will show in start of each policy when you do show configuration
> (without display set)
> 
> Br
> Asad
> On Nov 5, 2014 6:43 PM, "Harri Makela via juniper-nsp" <
> juniper-nsp at puck.nether.net> wrote:
> 
> >
> > Hi There
> >
> >
> >
> >
> > is there anyway that we can add description of firewall policies. Firewall
> > policy name is restricted to 63 chracters on Junos which is not sufficient
> > to review the firewall policies on periodic basis. I can only add flows
> > related information with policy name and description is required to add
> > further details like who requested it, when it was added, quarterly review
> > if this flow is required not etc. to comply with AUDIT requirements
> >
> >
> >
> >
> >
> > Thnaks
> >