[j-nsp] EX4550 L2Circuit/VPN to MX80/lt Interface

[Michael Hallgren]

Le 12/11/2014 12:11, Raphael Mazelier a écrit :
>
>
>> Le 11/11/2014 21:08, 👪Karl Brumund - lists a écrit :
>>> EX (and QFX) have limited MPLS capabilities. The data sheet is
>>> rather optimistic about the capabilities, and a bit misleading about
>>> such things as route limits
>>> Expecting a cheap switch with merchant silicon to do the same as an
>>> expensive MX with custom ASICs is asking for trouble.
>>>
>>> Seriously, just do L2. Customer port is access, MX80 is trunked.
>>> You’re just asking for trouble with MPLS and L2VPN.
>>
>> Much of the same opinion, from quite recent exposure.
>>
>> Cheers,
>>
>> mh
>>
>
> Agreed on cheaper switch. High end EX series seems a bit different
> tought. Some big IX (Linx, FranceIX) run with vpls topologies on
> EX9200 series (with some issues :) ).

Yep, the higher end ones have richer spec's, right.

>
> Anyway. Redesigning my network at this stage might be challenging.
> I will try to let this work, and think about a new design in //.
>

I know. Maybe Chip's way?

TTYS,
mh

> Thks.
>