[j-nsp] Identifying the egress interface for a flow using LACP

John Neiberger jneiberger at gmail.com
Wed Oct 1 11:46:19 EDT 2014


You may be referring to a question I had about ECMP a few months ago. In my
case, I was sent to this link which was very helpful. You're right, it is
way more involved than it should be.

http://www.junosandme.net/article-junos-load-balancing-part-3-troubleshooting-109382234.html

Regards,
John

On Wed, Oct 1, 2014 at 8:29 AM, Daniel Rohan <drohan at gmail.com> wrote:

> Hi all,
>
> I seem to remember a great thread where someone asked how to identify which
> interface from a LAG or LACP group a flow would take or is taking based
> upon the tupple. IIRC, the answer provided was involved and included some
> hidden pfe execute commands, but I could be wrong. In any case, I can't
> find the thread.
>
> Does anyone know how to do this?
>
> Thanks,
>
> Dan
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>


More information about the juniper-nsp mailing list