[j-nsp] Cosmetic bug? - mx80 12.2r7.7

[sthaug at nethelp.no]

> I'm running 12.2r7.7 on an MX80 and I'm seeing very high cpu on the tfeb and fpcs. However when logging into the tfeb the CPU is 'idle' for the majority of the time. The time reported is 100% though. It's not actually affecting traffic forwarding. I've logged a jtac case but wondering if anyone is seeing this.
> 
> root at mx80> show chassis tfeb
> TFEB status:
> Slot 0 information:
>   State                                 Online
>   Intake temperature                 42 degrees C / 107 degrees F
>   Exhaust temperature                57 degrees C / 134 degrees F
>   CPU utilization                   100 percent
>   Interrupt utilization               7 percent
>   Heap utilization                   18 percent
>   Buffer utilization                 13 percent
>   Total CPU DRAM                   1024 MB
>   Start time:                           2014-08-26 07:22:59 BST
>   Uptime:                               9 days, 50 minutes, 59 seconds

Did you mean 12.3R7.7? In that case - not seeing it. From one of our
MX80s running 12.3R7.7:

x at y> show chassis tfeb
TFEB status:
Slot 0 information:
  State                                 Online
  Intake temperature                 45 degrees C / 113 degrees F
  Exhaust temperature                62 degrees C / 143 degrees F
  CPU utilization                    10 percent
  Interrupt utilization               2 percent
  Heap utilization                   22 percent
  Buffer utilization                 13 percent
  Total CPU DRAM                   1024 MB
  Start time:                           2014-06-23 00:17:30 CEST
  Uptime:                               73 days, 12 hours, 6 minutes, 53 seconds

Steinar Haug, Nethelp consulting, sthaug at nethelp.no