[j-nsp] User Role Firewall in SRX

[Maarten van der Hoek]

Hi Nc,

>From the release notes:

. Integrated user firewall [SRX Series]-This feature retrieves user-to-IP
address
mappings from the Windows Active Directory to use as match criteria in
firewall policies.
The SRX Series device polls the event log of the Active Directory Controller
(ADC) to
determine who has logged on. The username and group are queried from the
LDAP
service in the ADC. The SRX Series device uses the IP address, username, and
group
information to generate authentication entries that the UserFW module uses
to enforce
user-based and group-based policy control over traffic.

Best regards,

Maarten

-----Oorspronkelijk bericht-----
Van: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] Namens Nc Aji
Verzonden: dinsdag 9 september 2014 16:21
Aan: juniper-nsp at puck.nether.net
Onderwerp: [j-nsp] User Role Firewall in SRX

Does the Juniper SRX with Latest version 12.1x47 Support User Firewall roles
without using MAG.

I wasn't able to see that in the release notes also in the feature explorer.

Thank you all..
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp