[j-nsp] BGP Peer formatting

Scott Harvanek scott.harvanek at login.com
Wed Sep 10 07:53:52 EDT 2014


Awesome, thank you very much :-)

Both work great!

Scott H.

On 9/9/14, 9:32 PM, Ben Dale wrote:
> On 10 Sep 2014, at 7:54 am, Scott Harvanek <scott.harvanek at login.com> wrote:
>
>> This is a silly/OCD question;
>>
>> I've faced this before and I can't recall how it was "prettied" up...
>>
>> If I recall there is a way to pretty up the formatting of show bgp summary;
>>
>> Peer                     AS      InPkt     OutPkt    OutQ   Flaps Last Up/Dwn State|#Active/Received/Accepted/Damped...
>> XXX.XXX.XXX.XXX       XXXXX    4463666     120866       0       0 5w3d 9:31:20 Establ
>>   inet.0: 272410/510233/510233/0
>>
>> To remove the line break / fix the table formatting.  I've tried adjusting screen-width with no joy.
>>
>> Halp?
> There's a few ways to neaten it, but it's a case of which information you can live without:
>
> show bgp summary | except inet
> show bgp group summary | match l:
>
> Failing that, I just hacked up an op script to only show a summarised version from each peer - output here:
>
> https://github.com/dfex/DFEXjunoscripts/blob/master/show-bgp-neat.md
>
> Code here:
>
> https://github.com/dfex/DFEXjunoscripts/blob/master/show-bgp-neat.slax
>
> The script *should* sum all the prefixes from each RIB into a single summarised number per peer, but I haven't had a chance to test it too thoroughly yet.  Feedback/Pull Requests welcome.
>
> Cheers,
>
> Ben
>
>



More information about the juniper-nsp mailing list