[j-nsp] CGNAT on a MX240 acting as BNG

[Шепелев Андрей]

MS-DPC is not very cost effetive at our days.
have you looked at new MS-MPC?

if i`m not mistaken it is cheaper and has more perfomance...

2014-09-18 14:14 GMT+06:00 Shu Li <shuli at shuli.net>:

> Yes, you can run both on the same box, but need to pick a JUNOS
> officially support both.
>
>
> On 9/18/14, 4:25 PM, Octavio Alfageme wrote:
>
>> Hi everyone,
>>
>> I have several MX240s acting as BNGs for PPPoE subscribers. Due to IPv4
>> scarcity I need to start running CGNAT on them (both NAT444 and DS-Lite)
>> with dedicated MS-DPC cards. I've searching for information about this
>> scenario and I was unable to find it. Do you know if there are
>> restrictions
>> to run BNG function and CGNAT for these PPPoE subscribers in the same
>> MX240? Does any of you have MX series routers acting as CGNAT/BNGs in your
>> network?
>>
>> Thanks in advance
>>
>> Octavio
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>