[j-nsp] Sflow + ntop

[Paul S.]

I'm not 100% sure of this, but I believe ntop/ntopng can only parse 
their own Json based flow format.

So, what you have to do is use nprobe to receive the flows and convert 
them, then transmit them to ntop's zmq server..

Please also note that nprobe is not free for commercial use.

On 9/26/2014 午前 08:41, Rodrigo Augusto wrote:
> Hi folks! what do you guys do to monitor customer traffic with ntop and sflow?!
> I follow some instructions (http://www.gossamer-threads.com/lists/ntop/users/27055) but not have success... Does Exist any different version of ntop to collect sflow's on ex swichs?!
> I am using ex3300 to send flows to the collector, i see the traffic on especific port, but not show any information( src and dst ).
> My switch have simple configuration:
> Port ge-0/0/0 is on access mode with a vlan member and port xe-0/0/0 trunk all vlan members. And add sflow to ge-0/0/0...
>
> When i try to see ,nothing show me...
> Enviado via iPhone 
> Grupo Connectoway
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp