[j-nsp] Sflow + ntop

[Paul S.]

I recommend the nfsen+nfdump combo, works beautifully.

On 9/26/2014 午後 01:06, Payam Chychi wrote:
> Thats correct. You could also monitor on the switch port side of 
> things with snmp
>
> If your going to pay, inmon is a great application.
>
> -- 
> Payam Chychi
> Network Engineer / Security Specialist
>
> On Thursday, September 25, 2014 at 7:23 PM, Paul S. wrote:
>
>> I'm not 100% sure of this, but I believe ntop/ntopng can only parse
>> their own Json based flow format.
>>
>> So, what you have to do is use nprobe to receive the flows and convert
>> them, then transmit them to ntop's zmq server..
>>
>> Please also note that nprobe is not free for commercial use.
>>
>> On 9/26/2014 午前 08:41, Rodrigo Augusto wrote:
>>> Hi folks! what do you guys do to monitor customer traffic with ntop 
>>> and sflow?!
>>> I follow some instructions 
>>> (http://www.gossamer-threads.com/lists/ntop/users/27055) but not 
>>> have success... Does Exist any different version of ntop to collect 
>>> sflow's on ex swichs?!
>>> I am using ex3300 to send flows to the collector, i see the traffic 
>>> on especific port, but not show any information( src and dst ).
>>> My switch have simple configuration:
>>> Port ge-0/0/0 is on access mode with a vlan member and port xe-0/0/0 
>>> trunk all vlan members. And add sflow to ge-0/0/0...
>>>
>>> When i try to see ,nothing show me...
>>> Enviado via iPhone 
>>> Grupo Connectoway
>>>
>>> _______________________________________________
>>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>