[j-nsp] Discard Interface

[harbor235]

Correct, I see rpf failures, however the firewall log specified on the
dsc.0 interface is the reporting filter of the discarded traffic? Is there
a solution to correct the problem?


Mike

On Tue, Apr 7, 2015 at 1:29 PM, Chris Morrow <morrowc at ops-netman.net> wrote:

>
>
> On 04/07/2015 01:23 PM, harbor235 wrote:
> > I am having issues updating interface stats via the discard interface,
> dsc.0
> >
> > I have successfully setup a trigger router for injecting routes I need
> > discarded at the edge.
> > The Edge router is a J series router (J2350) I have configured S/RTBH
> > routing and I am using dsc.0 for discarded traffic, coloring, and
> logging.
> >
> > My problem, traffic is discarded correctly, the output filter configured
> on
> > the dsc.0 interface correctly logs and discards the traffic. This is
> > verified via the :show firewall log" cmds, but, I see no stats updates
> via
> > "show interface dsc.0 extensive"  for the dsc.0 interface. The route for
> > the discarded prefix(s) correctly points to the destination address of
> the
> > dsc.0 interface.  What am i missing here? Should I expect traffic stats
> on
> > dsc.0 and the firewall log output?
>
> I bet you see discards on the input interface.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>