[j-nsp] QinQ on MX bridge-ing

[Robert Hass]

Hi

I'm looking for hint how to configure port in QinQ mode on MX.
I need to have QinQ enabled on ge-1/1/7 (Customer) and interconnected via
Trunk port to EX4200 on ge-1/1/9. VLAN ID can be 104.

I looked at manuals but cannot find this.

My current L2 bridging configuration:

set interfaces ge-1/1/8 unit 0 family bridge interface-mode access
set interfaces ge-1/1/8 unit 0 family bridge vlan-id 101
set interfaces ge-1/1/9 unit 0 family bridge interface-mode trunk
set interfaces ge-1/1/9 unit 0 family bridge vlan-id-list 102
set interfaces ge-1/1/9 unit 0 family bridge vlan-id-list 103

set bridge-domains VLAN101 domain-type bridge
set bridge-domains VLAN101 vlan-id 101
set bridge-domains VLAN102 domain-type bridge
set bridge-domains VLAN102 vlan-id 101
set bridge-domains VLAN103 domain-type bridge
set bridge-domains VLAN103 vlan-id 101

Thanks
Rob