[j-nsp] IPv6 RE protection

[Jonathan Call]

This is a good starting point:
https://tools.ietf.org/html/rfc6192> Date: Sat, 25 Apr 2015 22:36:47 +0200
> From: cydonsatyr at gmail.com
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] IPv6 RE protection
> 
> Hello,
> Currently we don't use any IPv6 RE protect filters on our routers (6PE only
> in network). We do use IPv6 filters on public interfaces, however.
> Would you recommend deploying IPv6 RE filters on our edge routers at least.
> 
> What kind of configuration you have in your network?
> 
> Also, do you know if Juniper still only supports matching on one
> next-header?
> 
> Best Regards community
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp