[j-nsp] JTAC Recommended Junos Software Versions Old?

[Mark Tinka]

On 29/Apr/15 18:58, Colton Conor wrote:
>
> I notice that the Juniper JTAC recommends Junos 13.3R4.6 for the MX104 and
> PTX series? If Junos 13.3R4.6 is stable enough to run on these platforms,
> then I assume its stable enough to run on the other MX platforms, the MX80
> to be specific?

The MX104 and PTX are newer than the MX80/240/480/960, so the oldest
(read: most stable) code JTAC will recommend will be much newer compared
to what is recommended for the other platforms.

Mark.