[j-nsp] JTAC Recommended Junos Software Versions Old?

[Colton Conor]

So what version does the community recommend for an MX80. Looking to make
the jump from 12.3 to 13.3.

On Thu, Apr 30, 2015 at 5:04 AM, Olivier Benghozi <
olivier.benghozi at wifirst.fr> wrote:

> MX104 is not supported in 12.3, it's that simple (13.2 minimum).
> And about features, MX104 is on par with other MX only in 13.3 anyway.
>
> Not very different on newer PTX chassis.
>
>
> > Le 30 avr. 2015 à 08:18, Mark Tinka <mark.tinka at seacom.mu> a écrit :
> >
> > On 29/Apr/15 18:58, Colton Conor wrote:
> >>
> >> I notice that the Juniper JTAC recommends Junos 13.3R4.6 for the MX104
> and
> >> PTX series? If Junos 13.3R4.6 is stable enough to run on these
> platforms,
> >> then I assume its stable enough to run on the other MX platforms, the
> MX80
> >> to be specific?
> >
> > The MX104 and PTX are newer than the MX80/240/480/960, so the oldest
> > (read: most stable) code JTAC will recommend will be much newer compared
> > to what is recommended for the other platforms.
> >
> > Mark.
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>