[j-nsp] Looking for paid config - source/port NAT?

[Michael Loftis]

You can do a transparent proxy type setup. Using the firewall filter syntax
to change the next hop to a properly configured Linux, FreeBSD, or whatever
host.

On Wednesday, August 5, 2015, Markus <universe at truemetal.org> wrote:

> Hi list,
>
> I'm looking for someone to create the following config on an M7i with
> 12.3R2.5 for me:
>
> Several source addresses on the LAN should not be able to contact port 25
> on the internet, but instead all these connections should be relayed
> through an external mail relay.
>
> I can't seem to figure it out by myself. Not sure if I even need NAT or
> not.
>
> Anyone available to do this paid & rather quickly? Please contact me
> off-list.
>
> Thank you!
> Markus
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>


-- 

"Genius might be described as a supreme capacity for getting its possessors
into trouble of all kinds."
-- Samuel Butler