[j-nsp] Reboot: right or wrong ?

[james list]

Hi
In the second case if instead of hitting enter after the normal shutdown
you power off and then power on, which is the reason you get?

Greetings
Il 14/Ago/2015 07:30, "MSusiva" <ssiva1086 at gmail.com> ha scritto:

> 1)      Last reboot reason             0x1:power cycle/failure
>
> [Answer] This could be due to unexpected power failure or power loss to RE.
>
> 2)      Last reboot reason             Router rebooted after a normal
> shutdown.
>
> [Answer] This reason is shown when a reboot is requested using a cli
> command.
>
>
> When command "request system halt" is executed, the RE is halted and
> reboot reason is recorded as normal shutdown as you see below:
>
> "Mar 16 04:27:48 Waiting (max 60 seconds) for system process `vnlru_mem'
> to stop...done
> Waiting (max 60 seconds) for system process `vnlru' to stop...done
> Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
> Waiting (max 60 seconds) for system process `syncer' to stop...
> Syncing disks, vnodes remaining...0 0 0 0 0 0 0 0 0 done
>
> syncing disks... All buffers synced.
> Uptime: 18m37s
> recorded reboot as normal shutdown
>
> The operating system has halted.
> Please press any key to reboot."
>
>
> After this event, if you hit enter the RE is rebooted and reboot reason is
> shown as "normal shutdown".
>
>