[j-nsp] Policy-statement to match on metrics less than, greater than, or within a range

[Alexander Arseniev]

There is a floor for MED and it is 0.
What You could do is :

term 1 then { metric subtract 1000; next term }
term 2 from metric 0; then { local-preference 100; accept }

You won't be able to keep the original MED though :-(
HTH
Thanks
Alex

On 27/08/2015 05:40, Mark Tinka wrote:
>
> On 27/Aug/15 01:55, Phil Rosenthal wrote:
>
>> Hello all,
>>
>> On Cisco, it is possible to write a route policy as such:
>>
>> route-policy test
>>      if med le 1000 then
>>      set local-preference 100
>>    endif
>>    end-policy
>>
>> Is there any way to do the same thing with Juniper? It seems that the “from metric” statement only accepts a static value (comparable to "if med eq 1000”).
> I've never used metric as a match condition in anything, but from what I
> can see in Junos, the value needs to be absolute.
>
> Of course, you can have as many terms as you want matching various
> metric values, but this is not as elegant as the IOS XR one, I suppose.
>
> Mark.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp