[j-nsp] SNMP OID for CPU temperature

[Rajendra Maharjan]

Hi Dale,

I am on MX router and temperature value given by snmp walk is of RE which we are already using. But there is no any oid that points out CPU Temperature
run show snmp mib walk jnxOperatingTemp
jnxOperatingTemp.1.1.0.0 = 0
jnxOperatingTemp.2.1.0.0 = 58
jnxOperatingTemp.2.2.0.0 = 48
jnxOperatingTemp.4.1.0.0 = 0
jnxOperatingTemp.4.1.1.0 = 0
jnxOperatingTemp.4.1.2.0 = 0
jnxOperatingTemp.4.1.3.0 = 0
jnxOperatingTemp.4.1.4.0 = 0
jnxOperatingTemp.4.1.5.0 = 0
jnxOperatingTemp.6.1.0.0 = 72
jnxOperatingTemp.6.1.1.0 = 55
jnxOperatingTemp.6.1.2.0 = 70
jnxOperatingTemp.6.1.3.0 = 73
jnxOperatingTemp.7.1.0.0 = 72
jnxOperatingTemp.7.2.0.0 = 72
jnxOperatingTemp.7.3.0.0 = 72
jnxOperatingTemp.8.1.1.0 = 0
jnxOperatingTemp.8.1.2.0 = 0
jnxOperatingTemp.8.2.1.0 = 0
jnxOperatingTemp.8.2.2.0 = 0
jnxOperatingTemp.8.3.1.0 = 0
jnxOperatingTemp.9.1.0.0 = 56
jnxOperatingTemp.20.1.1.0 = 0
jnxOperatingTemp.20.2.1.0 = 0
jnxOperatingTemp.20.2.2.0 = 0
jnxOperatingTemp.20.3.1.0 = 0

#run show chassis routing-engine
Routing Engine status:
  Slot 0:
    Current state                  Master
    Election priority              Master (default)
    Temperature                 56 degrees C / 132 degrees F
    CPU temperature             67 degrees C / 152 degrees F


Regards,
Rajendra Maharjan


On Dec 1, 2015, at 12:26 PM, Dale Shaw <dale.shaw+j-nsp at gmail.com> wrote:

> show snmp mib walk jnxOperatingTemp