[j-nsp] MTU on switch interfaces

[Mark Tinka]

On 19/Dec/15 05:23, Victor Sudakov wrote:

> Dear Colleagues,
>
> The MTU on EX4200 ports in port-mode access is 1514 bytes. Shouldn't
> it become 1518 bytes when the port is reconfigured in port-mode trunk ?

You can set the interface MTU on the EX4200 to whatever you want; up to
9,192 bytes.

>
> And if I want to configure the MTU on an EX4200 to match MTU=2000 on a
> Cisco Catalyst, what would be the correct value? 2014? 2018?

+14 bytes on the Juniper for whatever you have running on IOS and IOS XE.

Mark.