[j-nsp] NETCONF in Junos

Martin T m4rtntns at gmail.com
Mon Dec 21 05:50:07 EST 2015


Thanks!


Martin

On 12/21/15, Matt Bernstein via juniper-nsp <juniper-nsp at puck.nether.net> wrote:
> On 21/12/2015 08:57, Martin T wrote:
>> Thanks! So as I understand, the general idea is that it doesn't matter
>> much for Junos if the command is executed in the CLI or from the
>> remote(management server) NETCONF manager, i.e. Junos is basically
>> built around the NETCONF? However, local calls(for example if one
>> executes "show version" in Junos CLI) do not travel internally over
>> SSH as remote calls would, do they?
> Yes. the Junos CLI can itself be considered a (really nice) NETCONF
> wrapper. It makes me idly wish other vendors' NETCONF implementations
> were good enough that the Junos CLI could be used on them!
>
> I doubt the CLI uses SSH internally, but I suppose it wouldn't really
> matter if it did.
>
> Matt
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>


More information about the juniper-nsp mailing list