[j-nsp] EX4200 console port woes

[Chris Adams]

Once upon a time, Eric Van Tol <eric at atlantech.net> said:
> I’ve looked at this and there’s nothing in the console port config at all. I’ve tried disabling and re-enabling the console port in the config, as well as rebooting the switch to see if there was some “negotiation” going on. I’m able to connect to the console using a Cisco 2511 terminal server, as well as just a regular serial connection to a PC. It’s just the connection to this MRV console server that isn’t working. This is what I get:

Try a different port on your console server?
-- 
Chris Adams <cma at cmadams.net>