[j-nsp] IS-IS not installing route into RIB

Diogo Montagner diogo.montagner at gmail.com
Fri Feb 6 04:43:47 EST 2015

Is the route in the isis database ?

If yes, can you please post the output of the isis db ?

Is this a multilevel network ? If yes, did you check the up/down bits ?

On Friday, 6 February 2015, Dragan Jovicic <draganj84 at gmail.com> wrote:

> Hello.
> We have two routers in ISP network exporting identical static routes to
> IS-IS; all routers install static route to closest of the two routers.
> Those two routes do not install route received over IS-IS as inactive into
> inet.0 table.
> Only when one of the two routers deletes its static route, is route from
> IS-IS installed into IS-IS RIB and in routing table.
> Could anyone shed a light on this - is this expected behavior? Shouldn't
> both routers install two routes as inactive into inet.0 table?
> Regards
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net <javascript:;>
> https://puck.nether.net/mailman/listinfo/juniper-nsp

./diogo -montagner

More information about the juniper-nsp mailing list