[j-nsp] LACP accept-data

[Adam Vitkovsky]

Right but this is actually for LACP not the VRRP.

adam

> -----Original Message-----
> From: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf
> Of ashish verma
> Sent: 19 January 2015 22:09
> To: juniper-nsp
> Subject: Re: [j-nsp] LACP accept-data
> 
> yes we use it, haven't faced any problems. You wont be able to ping the
> VRRP IP otherwise, required for testing etc.
> 
> On Tue, Jan 20, 2015 at 12:33 AM, Daniel Roesen <dr at cluenet.de> wrote:
> 
> > Hi,
> >
> > On Mon, Jan 19, 2015 at 12:06:23PM +0000, Adam Vitkovsky wrote:
> > > Is anyone using the "accept-data" knob under the lacp config on AE
> > > interfaces running as L3 please? Should be safe right?
> >
> > Yes. Why shouldn't it?
> >
> > Best regards,
> > Daniel
> >
> > --
> > CLUE-RIPE -- Jabber: dr at cluenet.de -- dr at IRCnet -- PGP: 0xA85C8AA0
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
---------------------------------------------------------------------------------------
 This email has been scanned for email related threats and delivered safely by Mimecast.
 For more information please visit http://www.mimecast.com
---------------------------------------------------------------------------------------