[j-nsp] show system boot-messages

Phil Shafer phil at juniper.net
Tue Jan 20 20:33:26 EST 2015


"show system boot-messages" == "file show /var/run/dmesg.boot"

where /etc/rc says:

   # Keep a copy of the boot messages around
   dmesg > /var/run/dmesg.boot

Thanks,
 Phil


Scott Granados writes:
>Can't you execute the dmesg command from the shell and watch the output there?
>
>On Jan 20, 2015, at 1:38 PM, Saku Ytti <saku at ytti.fi> wrote:
>
>> On (2015-01-20 11:26 +0000), Adam Vitkovsky wrote:
>> 
>> Hey Adam,
>> 
>>> I assume the cmd "show system boot-messages" shows just the Junos booting process
>>> Is there a way to see the whole boot dumps- you know HW booting (MPCs/PEMs/SCBs/REs) 
>-or is that even recorded somewhere please?
>> 
>> You need to observe console port during boot to see all. For MPC connect to
>> them 'start shell pfe direct fpcX' before booting.
>> 
>> -- 
>>  ++ytti
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/juniper-nsp


More information about the juniper-nsp mailing list