[j-nsp] Junos MX series and Andrisoft Flow tools

[John Brown]

Hi Paul,

Yes all devices sync to the same internal NTP servers and are set for
the same TZ.

On Sun, Jan 25, 2015 at 8:40 PM, Paul S. <contact at winterei.se> wrote:
> Just as a thought, do both systems have time synchronized with something
> like ntp?
>
> I've found that it helps to use the same timezone on the system hosting
> WANGuard as well as the routers (You should technically be using UTC anyway)
>
> On 1/26/2015 午前 06:34, John Brown wrote:
>>
>> Hi,
>>
>> I'm looking for advise on configuring our MX480 (Junos 12.3R4.6) to
>> support
>> IPFIX flows for Andrisoft's WanGuard flow based tools.  They only have
>> samples for M series and that C company.
>>
>> I'm getting some errors on the Andrisoft console that make me wonder if I
>> have things set right.
>>
>> The MX is feeding multiple 10Gig links and a pile of 1 Gig links, both
>> IPv4
>> and IPv6
>>
>> Many thanks for pointers and help....
>>
>> here is the error I get on the Andrisoft console
>> Wrong flow timeout settings! Received flow from 391 seconds in the past!
>> 16
>> flows discarded
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp