[j-nsp] MX series ntp clock issue ??

[John Brown]

HI,
While trying track down another issue I went to make sure that the MX
clock was correct.
I'm a bit confused by the results.

Current time via "show system uptime" does NOT match the clock via
"show ntp status"
And the reftime in show ntp status and clock from the same aren't the same ?????

Thoughts, appreciated


jmbrown at cr01.abq> show system uptime
Current time: 2015-01-26 08:21:59 MST
System booted: 2014-04-14 16:46:51 MDT (40w6d 16:35 ago)
Protocols started: 2014-04-14 16:48:12 MDT (40w6d 16:33 ago)
Last configured: 2015-01-26 08:14:40 MST (00:07:19 ago) by jmbrown
 8:21AM  up 286 days, 16:35, 1 user, load averages: 0.06, 0.06, 0.01

jmbrown at cr01.abq> show ntp status
status=0644 leap_none, sync_ntp, 4 events, event_peer/strat_chg,
version="ntpd 4.2.0-a Fri Sep 13 01:28:39 UTC 2013 (1)",
processor="amd64", system="JUNOS12.3R4.6", leap=00, stratum=3,
precision=-21, rootdelay=67.766, rootdispersion=75.848, peer=3028,
refid=216.243.112.132,
reftime=d870d876.dd44b8d2  Mon, Jan 26 2015  8:15:02.864, poll=10,
clock=d870da19.ba096ea4  Mon, Jan 26 2015  8:22:01.726, state=4,
offset=4.583, frequency=16.045, jitter=1.354, stability=0.041