[j-nsp] Juniper mx80 mirror ae0 to ge
Marcin Wojcik
mail.network.bits at gmail.com
Thu Jul 2 11:46:21 EDT 2015
Hi,
replace this set chassis fpc 1 pic 1 port-mirror-instance mirror_reductor with:
set chassis fpc 1 port-mirror-instance mirror_reductor
For whatever reason PM did not work (when I tested it in the past)
when I tried to enable it for a particular pic. After enabling it for
fpc it worked ok.
Thanks,
Marcin.
On Tue, Jun 30, 2015 at 12:10 PM, <dmitry at zhigulinet.ru> wrote:
> Hi, Juniper-nsp.
>
> I tried configure port mirrror on mx80, but i have problem I don't
> watch traffic on the port ge-1/0/5
>
> set chassis fpc 1 pic 1 port-mirror-instance mirror_reductor
> set forwarding-options port-mirroring instance mirror_reductor input rate 1
> set forwarding-options port-mirroring instance mirror_reductor input run-length 0
> set forwarding-options port-mirroring instance mirror_reductor family inet output interface ge-1/0/5.0 next-hop 192.168.98.2
> set forwarding-options port-mirroring instance mirror_reductor family inet output no-filter-check
> set firewall filter mirror_reductor term dst-http-https from protocol tcp
> set firewall filter mirror_reductor term dst-http-https from destination-port 80
> set firewall filter mirror_reductor term dst-http-https from destination-port 443
> set firewall filter mirror_reductor term mirror then count mirror_reductor
> set firewall filter mirror_reductor term mirror then port-mirror-instance mirror_reductor
> set firewall filter mirror_reductor term default then accept
>
> set interfaces ae0 unit 0 family inet filter input mirror_reductor
>
>
> set interfaces ge-1/0/5 description --mirror-to-reductor--
> set interfaces ge-1/0/5 unit 0 family inet address 192.168.98.1/30 arp 192.168.98.2 mac 00:11:22:33:44:55
> set forwarding-options port-mirroring instance mirror_reductor family inet output interface ge-1/0/5.0 next-hop 192.168.98.2
>
> set interfaces ge-1/1/0 gigether-options 802.3ad ae0
> set interfaces ge-1/1/1 gigether-options 802.3ad ae0
> set interfaces ge-1/1/2 gigether-options 802.3ad ae0
> set interfaces ae0 unit 0 family inet address 123.143.143.246/30
>
>
> --
> Best regards
> Dmitry mailto:dmitry at zhigulinet.ru
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp
mailing list