[j-nsp] L2VPN between Juniper MX and SmartEdge

david.roy at orange.com david.roy at orange.com
Thu Jul 9 17:19:55 EDT 2015


Hello

Here my config on MX which works with SE routers:


xe-19/0/2 {
   vlan-tagging;
        mtu 4488;
        encapsulation flexible-ethernet-services;
  	unit 1668 {
                    encapsulation vlan-ccc;
                    vlan-id 1668;
                    input-vlan-map pop;
                    output-vlan-map push;
                }
l2circuit {
                neighbor X.X.X.X {
                    interface xe-19/0/2. 1668{
                        virtual-circuit-id 1668;
                        encapsulation-type ethernet;
                    }
	}
}

David Roy 
IP/MPLS NOC engineer - Orange France
Ph. : +33 2 99 28 57 66
Mob. : +33 6 85 52 22 13
SkypeID : davidroy.35
david.roy at orange.com
 
JNCIE x3 (SP #703 ; ENT #305 ; SEC #144)


-----Original Message-----
From: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Olivier Benghozi
Sent: jeudi 9 juillet 2015 22:07
To: redback-nsp at puck.nether.net; juniper-nsp
Subject: [j-nsp] L2VPN between Juniper MX and SmartEdge

Hi guys,

any clue about interoperability issue between Juniper (some MX in JunOS 13.3R5, MPC cards) and Redback (SE600, SEOS 12.1.1.9, PPA3 20x1GE card) about L2VPN pseudowire, Martini style (using LDP signaling and LDP LSP) ?

I'm trying to use such feature to forward a vlan between some equipments plugged to those two routers; the tunnel is up, packets flow from the Redback dot1q pvc to the stuff plugged behind the MX vlan-tagged unit (in family vlan-ccc), but in the other direction, the SmartEdge keeps saying "packets sent: 0" on the physical port...


Thanks.
Olivier

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp

_________________________________________________________________________________________________________________________

Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration,
Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci.

This message and its attachments may contain confidential or privileged information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete this message and its attachments.
As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified.
Thank you.



More information about the juniper-nsp mailing list