[j-nsp] SMB != Server Message Block

Julien Goodwin jgoodwin at studio442.com.au
Fri Jul 10 06:16:10 EDT 2015


Because I know a bunch of juniper staff read this list.

In the datasheet for both the QFX10k & PTX1k is an error, I pointed it 
out back when the QFX10k launched, but it's not fixed and the PTX1k 
sheet has the same error.

In both of them the Sub-Miniature B connectors used for timing have 
their names expanded as "Server Message Block", which, while right for 
the network protocol is wrong in this case.

Yay for overloaded names.


More information about the juniper-nsp mailing list